- Single Sided printer that uses Retransfer printing technology to print ID cards.
- Prints in Color; Print speed is 90 cards per hour (YMCK).
- Bi-Directional USB interface and Ethernet for Networking are standard.
- Output Card Hopper holds 100 cards. Accepted Card thickness is 10 mil to 40 mil.
- The full color print ribbon, YMCK, yields 1000 prints.
You can print high quality ID cards at a low cost per card with the Datacard SR200. The retransfer printing technology delivers superior quality ID cards. You will be amazed with the quality.
Your accessories are protected by an electronic lock. You wouldn’t have to worry about anyone stealing your cards or ink ribbons. They will be safe and sound.
You can print on a number of card materials. These materials can be PVC, ABS, PET, PET-G and polycarbonate, and you’ll get the same high quality.
Optional Lamination You can add the optional laminator to the Datacard SR200. This laminator will laminate single side of your ID card, and apply topcoats or laminates.
Easy to LoadThe ribbons are high capacity, and they’ll last for a while. Once their life is over, they can be easily replaced. To replace it, open the front panel, remove the current ribbon, and add the new one.
LCD Panel The built in LCD is easy to read. The instructions are clear, and there are three menu buttons. The LCD will display the print status including errors so that you can take fix them.
No Stoppage The input hopper makes it easy to load cards. You can even load cards while it is printing to continue the print process. The printing won’t be disturbed. The input hopper can hold up to 100 cards.
Cassette Loading The retransfer film of the Datacard SR200 is cassette based. The cassette has an advantage since it produces high quality images, and is easy to install. It has been designed so that you can load it easily.
|Printing speed||Up to 100 four-color, one-sided cards per hour|
|Lamination Speed||Up to 21 secs/ card for lamination transfer|
|Resolution||(11.8 dots/mm), 300 dots per inch (dpi)|
|Card types||ABS, PET, PET-G, PVC|
|Card thickness||3.370 in. x 2.125 in 0.25 mm to 1.0 mm (10 mil to 40 mil)|
|Dimensions||L 13.2 in x W 12.7 in x H 13.5 in.|
(335 mm x 343 mm x 322 mm)
|Dimensions of Laminator||L 13.2 in x W 8.3 x H 14.2 in. (210 mm × 330 mm × 360 mm)|
|Weight of Laminator||Less than 24.3 lbs. (11.0 kg)|
|Operating Temperature||35 - 70% relative humidity, 60º - 86º F (15º - 30º C)|
|Options||24-month standard depot warranty; Lifetime printhead warranty|
|Note||Terms and Conditions may apply|